1.Description
This module sends a one at sunset. The longitude and latitude of the building location is specified for this purpose. The respective signal can be output with a time delay.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | E1 Latitude | 0 | Latitude, e.g., 50.67 degrees |
| 2 | E2 longitude | 0 | Longitude, e.g. 67.89 degrees |
| 3 | E3 Cycle (min.) | 0 | Cycle in minutes - The position of the sun is recalculated at these intervals. If the value <= zero, then no calculation takes place. |
| 4 | E4 Offset (min.) | 0 | Time offset in minutes - Sending the output signal is increased or lowered (in the case of negative time) by this time. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | A1 | 0 | s | Sends a 1 when the sun sets. Observe the time offset. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | Yes |
|---|---|
| Module is retentive: | No |
| Internal designation: | 9085 |
| Category: | Time functions |