ISDN direct dial-in (remote access)
In this mask only the direct dial-in into the HS/FS via ISDN (via a PC) is configured; these settings are independent of the DTMF dial-in.
Important
The direct dial-in was tested with newer ISDN adapters from AVM (R).
We assume no operating guarantee for ISDN modems of other manufacturers!!

Analogue modems are not suitable!!

A data communications connection must be configured in the PC dialling in!

ISDN remote access from outside

Yes: the following fields are enabled for entry of the required parameters.

MSN for ISDN dial-in

The MSN for direct dial-in into the HS/FS.
Up to 2 independent dial-ins are possible simultaneously via an ISDN connection (if both ISDN lines are not assigned otherwise and you are not using "HomeServer 4" or "FacilityServer 4").
Note
Please note that an MSN is not preceded by a dialling prefix.

Own IP

IP address of HS/FS.
The HS/FS is addressed from the dialled-in PC via this address.
This IP address must be different from the IP address of the HS/FS in the network!
It is advisable to select a completely different IP address range!!!
Example: If the HS/FS network IP address is 192.168.0.150
, then the ISDN IP address could be: 192.168.2.150.

After logging in successfully, the HS/FS is then, for example, addressed in the browser as follows:
https://192.168.2.150/hs or
https://192.168.2.150/hslist

IP address for 1st ISDN channel

This IP address is assigned to the dialled-in PC.
Example: 192.168.2.151

IP address for 2nd ISDN channel

This IP address is assigned to the dialled-in PC.
Example: 192.168.2.152.
Important
If a "HomeServer 4" or "FacilityServer 4" is set for the device type in the project settings, an IP address cannot be assigned via the 2nd ISDN channel!

Data communications user

This user name is entered in the data communications connection of the PC dialling in.
The PC logs in with this user name.
This user has nothing to do with the HS/FS users! A completely different user name can be assigned here (e.g. dfue1).

Data communications password

This password is entered in the data communications connection of the PC dialling in.
The PC logs in with this password.

Access as internal user

Yes: The user has the status of an internal user. He/she requires internal access rights to the HS/FS.
No: The user has the status of an external user. He/she requires external access rights to the HS/FS.

The access rights are set under Master data\User\User rights\Interface.

Limit dialling-in to following numbers

Yes: The data communications dial-in may only be carried out from the following phone numbers.
The following formats are possible:

Example: *561 all phone numbers that end with 561
Example: 47 the phone number is exactly 47

No: Data communications dial-in is not limited to a phone number.