1.Description
This module switches the selected input to the output. In this way, the output receives the value of the selected input.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | E1 Selection | 0 | Selection - Choose the input. If this input has the value zero, the input value of Input 2 (Signal 1) is routed to the output. If this input has a value not equal to zero, the input value of Input 3 (Signal 2) is routed to the output. |
| 2 | E2 Signal | 0 | Input value |
| 3 | E3 Signal | 0 | Input value |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | A1 | 0 | s | Output signal |
s = send, sbc = send by change
4.Other
| Recalculation during start: | Yes |
|---|---|
| Module is retentive: | No |
| Internal designation: | 9088 |
| Category: | Selection switch |