Transfer via network
Previous / Next | Search | Help / Transfer via network
Contents
1.
Transfer via network
1.1.
Network address
1.2.
User data for login

1.Transfer via network

The settings for transferring data from the Expert to the HS/FS via an LAN/Internet connection are specified in this mask.

1.1.Network address

Address
The IP address specified here is used as the destination for the transfer.

Use the "Search Device" function to search for devices on the LAN and apply the address.

If a static IP address is assigned under Master Data/Project/Network, it is automatically suggested. If further addresses for remote access are set up under Master Data/Project/Network, these are also listed. If DHCP is activated in the project, the last used address is suggested.
IP port
This port is used for transfer.
Transfer data unencrypted
If this option is activated, the following transfer is made unencrypted, i.e. via the specified HTTP port.
The configured port for the respective transfer type is automatically displayed.

1.2.User data for login

User name
The HS/FS Expert logs into the HS/FS with this user name. The user must have administrator rights.
Password/PIN
The HS/FS Expert logs into the HS/FS with this password/PIN.
Save password
The HS/FS Expert saves the user name and password permanently. These data are proposed when the program is restarted.